International Oil and Gas Arbitration

Question: Critically evaluate the significance of an Arbitration Clause in the context of an Oil Gas contract. Answer: Every country is dependent on oil and gas for its economic development and its citizens can accomplish their day to day activities smoothly. After the second world war, along with the industrial revolution, the consumption of energy also increased. Not all countries have rich natural resources for exploration or they are not developed enough to explore them with advanced technology. Therefore, many international companies conduct exploration in the countries which are not well equipped to do it themselves. There comes the need for agreements between the host country and international oil and gas companies. These projects involve a very high investment amount and so comes lots of risk with it. Since two governments are involved in it, so it becomes a matter of their relationship and terms and conditions on which they both agree. Also, the product involved is petroleum, which has a lot of strategic importance to both nations. So, most of the times they choose arbitration method to solve the disputes (Alqurashi, 2005). Over the years, due to many laws and agreements between host countries and international companies, many arbitral awards have been published which are related to oil and gas industry. These laws and agreements became the raw material from which international law for oil and gas industry were drawn. There were lots of issues (investments, time period) which needs to be under some jurisprudence, in order to deal with them. To lure international petroleum companies, host countries try to generate their interest by various means as discussed below: License to explore: Initially in order to lure foreign companies, nations uses to give various concessions or license to explore and produce from its petroleum resources. Due to this, later on they were left with very little control of their own countrys resources. This resulted in lower profits, disputes and frustration to the citizens of the host country. Production sharing agreement: This is done mainly by those countries which lack technical and financial capability and so has to depend on someone to explore in their own land. The main benefit that the host country has that in case the foreign company fails to get any resource facility from the host country, then they have to bear all the failure cost. But if they get any suitable petroleum resource, they will share the profit with the host country (Otero Castrillo, 2013). Participation agreement: In this case, both the host country and foreign company invest to explore and locate for petroleum sites. For this they may form a new entity or can have a joint agreement. Common contractual provisions: In order to protect the interest of the host country and to make them feel secure, there are some contractual provisions like: local labor, training, obligations of domestic marketing, transparency with data, insurance, management etc. Key principles of contract formation in international commercial transactions and key international law principles and trends in the oil and gas sector: There are so many things that both international company and host countries have to consider before they make a deal. They both have to adjust to each other which is only possible if they understand each others requirements and interests. The deal may be of a long time period and they need to understand that environment does not remain same during that period. There can be a political turmoil, natural disasters, war, etc. they have to work for the mutual interests of each other. The host country has to understand that they have to provide safe and secure environment to the people of foreign oil company (Lake, 2007). Also the company has to keep in mind that there can be at times, some inevitable circumstances when things may not go there way, but still they should not compromise with the sovereignty like bribery, corruption, foul pla y. Some of the things to be considered are given below: Political Unrest: Since these projects involve very high capital investment, foreign companies should have far sighted vision to evaluate expected risks and its effects. Political unrest can occur at times of war, riots terrorism. A very recent example is about Turkey, which is in Headlines due to lots of political unrest in the country which was not expected by many. There can be many reasons for it that can be beyond the vision of investor an so they should be prepared to face such issues. Under such circumstances, even the current contracts and agreements are of no value. So a company should only invest in foreign countries in case they have some provision to provide compensation for the damage they faced under unfavorable political conditions. Export credit agencies: Some banks like Overseas Private Investment Corporation (US) give insurance on political risks. There are some countries that are coming out of dictatorship rules or market downfall and so are not very creditable to invest. In such countries, investors can seek insurance, though it can be very expensive and impose strict rules. Since they work with governments of host countries, they make a pressure on governments to protect investors and abide by the rules of the agreements (Talus, 2012). Also in case of dispute, both parties may want it to be settled in their respective courts. Therefore, they should finalize initially only about such issues. Currency risks: These risks can arise the investment is done in a particular currency and its products are sold in another currency. This will result in abrupt changes in the projects stability and profitability. This may not be revealed in accounts figures, but is actually happening. Safety: Investing companies may have lots of safety concerns like kidnapping, robbery, terrorism, physical or mental torture, threat to ladies or children. So safety norms that a company wants should be formulated before like CCTV cameras at sites, guards, fenced sites and houses. The helpers and drivers given should be properly verified of their background. Bribery: There can also be circumstances when foreign companies may try to bribe the officials of the host country to fulfil their vested interests. Some officials take the bribery and do the agreements as per the companies wish and then whole nation has to pay for it. To avoid such situations, many countries have made strict (FCPA law of the US) laws and fines along with imprisonment in case anyone has found guilty (Besche, 2016). Trainings: Foreign companies cannot take all the staff from their own country and have to take some employees from the host country. For this they have to give some trainings to the people of the host country. The training is mandatory for them to give and to take some officials on key positions of the project. They have to take training for the employees of foreign companies. The salary and perks given to them should be equivalent to the one given to the staff of foreign companies. Effectiveness of international law in addressing the environmental impact of oil exploration and exploitation: It became a very common practice for the oil and gas companies to abandon the land after exploiting it to the maximum and the cost to decommission it was very high. No one noticed this thing initially and this practice was continued for many years. This issue grabbed a lot of attention when Shell Oil declared that they will abandon the Brent Spar (oil storage floating on water). Greenpeace, an environmental organization objected this decision and asked it to decommission the oil storage spot (Brent Spar). Therefore, Shell had to decommission the spot and the cost that they had to pay to do it was quite high. Now, there are several international rules and conventions that ensure the decommission of the site by the oil and gas company. In 1958, UN passed a law that asks for removal of petroleum sites. Around 38 countries signed that convention since few countries were able to completely remove the offshore oil and gas facilities. Some countries faced few problems as they have some commitments to the petroleum companies by which they have to abide by. In 1982, the United Nations Convention on the Law of the Seas (UNCLOS) was passed, effectively superseding the 1958 Convention. UNCLOS contemplates the partial removal of offshore facilities (Alramahi, 2013). There are certain set standards that give guidelines for decommissioning of the abandoned facilities. For example International Maritime Organization says that something that is built in less than 100 mt. of water should be completely removed and in case it is built in deeper water then it should be partially removed. Demonstrate a critical understanding of the importance of oil and gas law: Most of the disputes that occur in commercial transactions of petroleum products are between the international oil companies and the host country. Both belong to different countries and have different laws as per their respective interests. Hence comes the importance of an international law, which can address the interests of both parties like national sovereignty, treaties and laws. Sovereignty: Sovereignty gives the right to nations to have their control of its natural resources and people of its country. Even if the government privatize certain things, but still it has every right to make nay changes in the ownership or taxes if required for the public and countrys benefit. This also gives them the power to expropriate the property of foreign companies. There can be times when the government changes and the new one wants changes and accordingly make legal changes which everyone has to abide by (Bowman, 2015). This gives a scope to a nation that it can take decisions for its own vested interests. Here comes the need for some international laws. International laws try to solve issues like this by refraining courts to make changes in laws that are dealing with international matters. Also, this law considers sovereign immunity according to which a nation and its resources cannot be sued in the other nations courts. So in case government wants to take a property fr om a foreign company, they cannot do this without appropriate compensation. In case there is a dispute of violating some terms of a contract between some host countrys company and foreign oil company, most of the nation consider that it does not snoop into the nations integrity. This is called restrictive theory of sovereign immunity. Treaties and Conventions: Agreements that are signed between countries can be in any form like conventions, protocols, pacts or treaties. Treaties are the agreements that are singed between either two countries (bilateral) or many nations (multilateral). Conventions just like treaties, but the number of nations signing it are very high. These all agreements form the basis of International law. All these treaties, conventions are the sources from where international law is made. Whenever there is any dispute, these treaties and international agreements help to solve the disputes (Balogun, 2001). Ratification of a particular convention represents the legal obligation of a participating nation to apply the convention. Some of the treaties are: Vienna Convention, United Nations Convention, the Hague Convention, New York Convention. Civil Law and Common Law Legal Systems: Domestic laws of the host country and one or more countries that are involved in the oil and gas transactions are different. So has to be a common law or civil law which is capable to resolve the disputes fairly (Scott, 2009). In case of a civil law, all the issues are solved by civil codes. There is no influence of their previous decisions or other courts. Whereas in case of common law courts, they do lots of probing into the matter before trials in court. The civil course doesnt do much of probing or interrogatories in order to solve the dispute (Soni Chatterjee, 2014). So, it becomes very important to know these systems of law and decide prior to any dispute that which legal system will be followed. Corrupt Practices Act: Some countries like The United States have domestic laws that regulate the foreign conduct of its citizens. It has an act called FCPA, which exclusively deals with such cases to protect its business. Many other nations also have such laws that control exports. Although this has discouraged the foreign companies to invest in the US. Such foreign controls has been decreased with the times as nations have understood the economic benefits of As free trade with their countries (Daintith, 2011). Conclusion: So, we can say that international law emerged from various conventions, treaties, cultures, protocols, pacts etc., which are signed between different nations to come to some common consensus on issues related to trade and also to resolve disputes. Since different nations have different laws based on its culture and circumstances and when organization of one country work in another, a lot of issues needs to have a common law that governs its proceedings and disputes. Also, to get fair benefit from this association, some arbitration has to be involved. We studied various aspects of this law by which it helps international trade to happen smoothly with the benefit of everyone. Bibliography Alqurashi, Z. A., 2005. International Oil and Gas Arbitration. Arbitrating International Petroleum Disputes: an Analysis of Key Substantive Law Issues, January. Alramahi, M., 2013. International oil and gas contracts and deal making, Available at: https://my.laureate.net/Faculty/webinars/Documents/2013June_International%20Oil%20and%20Gas%20Contracts%20and%20Deal%20Making.pdf Balogun, O. A., 2001. Nigeria: Legal Framework Of The Nigerian Petroleum Industry. Nigeria: Legal Framework Of The Nigerian Petroleum Industry, 03 April. Besche, A. D., 2016. Oil and gas - international law. Oil and gas - international law, Available at: https://www.adeb.no/en/system/oil-and-gas-international-law/ Bowman, J., 2015. International Arbitration. LEX PETROLEA: Sources and Successes of International Petroleum Law, February, Available at: https://www.kslaw.com/library/newsletters/EnergyNewsletter/2015/February/article1.html Daintith, T., 2011. Principles of oil gas Law: Sydney Law School, Available at: https://sydney.edu.au/law/news/docs_pdfs_images/2010/Dec/Principles_Of_Oil_and_Gas_Law.pdf Lake, L. W., 2007. PEH:International Oil and Gas Law. PEH:International Oil and Gas Law, Available at: https://petrowiki.org/PEH%3AInternational_Oil_and_Gas_Law Otero, C. Castrillo, G., 2013. Reflections on the law applicable to international oil contracts. The Journal of World Energy Law Business Advance, 14 March.pp. 1-34. Scott, R. F., 2009. Oil supply, Oil security and environmental objectives in international law: EOLSS, Available at: https://www.eolss.net/sample-chapters/c14/E1-36-02-01.pdf Soni, A. Chatterjee, A., 2014. Governance of the Petroleum and Natural Gas Sector in India: A Status Note: TERI-NFA, Available at: https://www.teriin.org/projects/nfa/pdf/working-paper-15-Governance-of-the-petroleum-and-natural-gas-sector-in-india-a-status-note.pdf Talus, K., 2012. OGEL Ten Years Special Issue: Internationalisation of Energy Law. OGEL Ten Years Special Issue: Internationalisation of Energy Law.

Auditing & Assurance Auditors Professional Ethics †Free Samples

Question: Discuss about the Auditing Assurance Auditor's Professional Ethics. Answer: Evaluation Of Risks In Business Of Hih Insurance Limited The prospects of incident of the losses more than the expected profits or occurrence of proceeds lower than expected in any business are called Business risks. These risks generally happen where the nature of business is very complex and management is not able to follow the generally accepted accounting principles it their true manner. These risks in any organization are pressurized by the various factors of business like management knowledge, management decision making power, the financials events of the organization related to sales, purchase, inventory, expenses, income, economic conditions, market forces, rules and regulation laid down by the government of the countryside in which business works. Business risks present in the given situation are Operational Business Risk. These risks generally occur due to the failure of management of organization in day to day business operations. In the present case of HIH Insurance Limited, the operations of the company in relation to investme nt creates the risk for the company as the company is investing in high risk profile stocks. The writing off whole investments in FAI shares in year 2000 by company creates huge losses in the income statements of the company results in presenting the operational financial losses to company. These risk can be assessed by the possibility of not achieving the company's objective of high returns. Along with operational risk reputational risk is also present in HIH Insurance and this can enumerated with demerger of Winterthur and change of name of company to HIH Winterthur to HIH Insurance Limited in 1998. This risk can evaluated by the degree of losing faith by third party in company's policies and procedures and the loss of revenue that company was facing causes slow death of HIH Insurance Company in March 1999. (Brumfield, 2010 and Jiangbo, 2003). Involvement And Recognition Of Inherent Risk Factor In Reporing Following are the inherent risk features that would increase the inherent risk assessment in HIH Insurance Company: Character of business of company- The insurance business in which company operates is highly risky business and involves lot of assessments in relation to claims and investment. The dependence of the insurance business is the re-insurance and investments and the company made wrong decision due to incompetency of the top level management while making investment decisions. Audit Observations of the previous year audits- In HIH company the auditor of the company is not able to clearly identifies the investment and change in management risks. The error is continues in subsequent years as well and the substantive measure are not taken by the company in order to lower the risk in company investment and management. Even after demerger with Winterthur, the company has purchased FAI shares, Marine Fire Insurance. Transaction with related parties- The company has purchased FAI shares from one of the Non Executive Director at a price more than the arm's length price and this fact is intentionally misstated in the financial statements of the company. Repeated engagement of Auditor- Even after the huge losses the company has paid $ 1.7 million and $1.631 million in the year 2000 to the auditor of the company and the risk of not identifying the problem at start level is not considered in the plan of audit by the auditor. Embezzlement of Assets- The company has written off the investment of $ 400 million which the company invested in FAI shares at zero value in September 2000 makes it high loss company. The CEO and other officers makes very unrealistic approach while making investment in volatile risk stocks. (Colbert, 2014). Complex nature of transactions of the company- The insurance business contains complex transactions like claims made to and by the company, insurance and reinsurance, investments and their returns as per need of the company to pay the insurance maturity are not considered by the people running the company. Rules and Regulations and government decisions increase the audit and business risks as the closure of the industry in California increases the claims of Works men resulting huge liability standing for the company. Deficiencies in Internal Control Policies increases the level of risk and thus the need of assessment of risks to mitigate the risks are high (World Bank, 2006). Accountability Towards Company And Creditors Of Auditor Significant Case Conclusion The auditor accountability arises if the auditor does not apply the all the audit procedures and ethical principles and laid down by Australian Auditing Standard Board. The auditor has liability towards all the users of the financial statements whether they are internal and external and also towards the company as whole and its management along with those charged with governance. The auditor responsibilities towards the Client are listed in the audit engagement letter and are generally related to methods the auditor adopts in finding the frauds and error and material misstatements in the financial statements. The auditor is accountable in terms of making true opinion about the affairs of the client and not sharing any confidential information of the business of the client. The auditor responsibilities towards the creditor arises by the rules and regulation governing the audit and reporting of the auditor. The auditor are bound to accountable to creditors in relation to credit worthin ess and ability to pay due of the company in his reporting. Following are the significant case laws which help in ascertaining the level of accountability of the auditor towards client and creditor: Touche Vs. Ultramares. This is the landmark of the year 1932, in which the accountability of the auditor is establish by the courts of law. The New courts held the auditor liable towards the company as the auditor has not fulfill all his responsibilities while doing audit of the client and before giving reporting about the client. Donoghue Vs. Stevenson 1932. The court held auditor accountable towards the creditors of the company as the auditor is not able find the frauds and not fulfill the requirements laid in international auditing standard relation to auditors responsibility to identify the frauds in the company. The auditor inability to report the inefficiency of the company in payment to creditor make his liability towards the creditor and they can claim damages from auditor as per order of courts. Daniels Vs. AWA Limited. It is the major case of the year 1995, where the auditor has not fulfill his primary responsibilities towards the company as already discussed in the engagement letter before taking up the audit. The failure of reporting to management of the company about weakness of internal control system give born to the claim of damges on auditor by the client (Tata, 2010). Circumstances Of Total Carelessness Of The Auditor Any audit cannot be done without using proper professional values and principles by the auditor. The users of financial reporting also have edge about credibility and consistency of the company if the auditor gives his true and fair opinion about the financial statements of the company. The below are the circumstances where the auditor shows carelessness in comply with his roles and duties: Review of Work- the audit reporting is done without proper review by the partner of audit firm then there seems that auditor is not interested in complying with his duty of giving fair opinion Unreasonable Sampling- the auditor has not done 100% audit due the complex nature of the business of client and also not follow the scientific methods for choosing the samples for auditing Improper Audit Evidence- The auditor is not able take proper documentation in form permanent and temporary audit file which shows that he has not done proper audit. More dependence on the Internal Control system of the company for assessment of correctness of the procedures of the company Non Compliance of AASB principles- where the audit does not act according the rules and regulations governed him in relation to his independence Inadequacy in reporting to the management and those charged with corporate governance about the frauds and errors identified during the audit. Situation in which auditor is professionally uncertain of his acts (Brumfield, 2010) Sign Up Of Previous Person From External Audit Team The performance of the auditor in respect of applicable rules and regulations is called independent external audit and such auditor is not related to the entity under audit. The entity also have edge in signing up with the previous external audit team member and benefits to an entity are listed as follows: Relevant Experience and Knowledge- the previous auditor has necessary experience and knowledge about the policies and procedures of the entity and can easily ascertain the quantum of audit methods to be applied according to the complexity of business of an entity. Better Relationship with employees of an entity- the good relation with employees of the entity helps the employees to report materials facts related to frauds and errors with hesitation to the audit team member. Less cost - As the auditor understand the key areas for which the knowledge is require to be given to audit staff, the cost of training of audit staff is less to an entity. Reward In Including Auditing And Non Auditing Services The Scope Of One Audit Firm To have the increased level of objectivity and reducing the occurrence of situation of self review threat and to main the independence of the auditor it is recommended by the Australian government regulations not to have the audit and non audit service from one audit firm. But increases number of audit and inclusion of professional behavior in the working of audit firm encourages the audit firm to perform both audit and non audit service to have financial security and reducing material misstatements in financial reporting. The following are the rewards for doing so to an entity : Better Knowledge about client- The audit firm will have good knowledge about the affairs of the company and helps in early finding of mistakes in any of the policies and methods of the company Speedy system of Reporting- The audit reporting about the financial and non financial matters can be done in rapid as the auditor need to check in depth about each and every aspect as the audit risk in low. Effective Compliance- If the professional services are taken at lower level only that is accounting level then the entity can effectively comply with the laws related taxation and timely filing in relation different authorities can be done (Verschoor, 2012). Situations Showing Contravention Of Ethical Standards The following are the situations which shows that the Ethical standards has not been properly followed : Employing Same firm for doing Audit and non Audit services- If the same firm performs both the services then the auditor is under situation of checking of his own work, judgment and opinion which is the contravention of Independence of auditor by the having possibility of danger of self review. Extra Assumptions- The same auditor always assumes that the policies on which reporting has been done in previous audit period need not to review this year and his extra assumptions on working of client some time lead to false reporting Better relationship among the audit staff and employees of client results in hurting the integrity of auditor as sometime auditor may do favor to employee by not reporting the mistakes of the employee. Self Interest of auditor and effect in reporting- continuous engagement of audit firm both all the services creates personal interest of auditor in the financial matters of the company which may hamper the reliability and relevance of reporting of the auditor. Suggestions Of Ramsay Report And Clerp 9 The Australian Corporate Law and Economic Reforms 9 which take Ramsay Report as a base for its finding gives the following suggestions for auditor which he has to follow as his moral duty: Inclusion of Remuneration Report in the annual report of the company by the board of directors of the company which shows the policies relating the benefits in financial and non financial terms given to key managerial personnel Increase the involvement of the those charged with corporate governance along with the top level management which helps in having the check on the decision making of top level management Reporting after certain period of time and the gap between to two time intervals will depend on the nature, size and complexity of business of an entity that is full and continuous disclosures by both management and auditor. Quality control review by the regularity bodies in relation to the working of an auditor and audit staff in terms to ensure that the auditor shall follow all the audit procedures in true fair spirit (Robinson, 2003). References: Brumfield, C.A., (2010) Business risk and the audit process.Journal of Accountancy,155(4), pp.60-68. Colbert, J.L., (2014). Inherent risk: An investigation of auditors' judgments.Accounting, Organizations and society,13(2), pp.111-121. Jiangbo X, (2003), HIH Insurance Limited: Corporate Governance and Corporate Excesses, available at https://www.seiofbluemountain.com/upload /product/201010/2010jjfzh05a8.pdf accessed on 04/05/2017. Robinson A, (2003), HIH Report and CLERP 9, available at https://www.allens.com.au/pubs/pdf/ma/focgmay03.pdf accessed on 04/05/2017. Tata MC, (2010), Legal Liability of CPAs, available at https://www.google.co.in/url?sa=trct=jq=esrc=ssource=webcd=1cad=rjauact=8ved=0ahUKEwjK0NmumajTAhUExLwKHWGmBq0QFgghMAAurl=http%3A%2F%2Fwww.wou.edu%2F~beebej%2FBA%2520451%2FChap004.pptusg=AFQjCNGebMKLW15csyn2X3G5e-qmyqHjEAbvm=bv.152479541,d.dGc accessed on 04/05/2017. Verschoor C, (2012), Pros and Cons of using External Auditors for Internal Auditing and Other Services available at https://www.financepractitioner.com/auditing-best-practice/pros-and-cons-of-using-external-auditors-for-internal-auditing-and-other-services?full accessed on 04/05/2017. World Bank, (2006), HIH Case Study on Corporate Governance, available at https://www.iaisweb.org/modules/cciais/assets/files/pdf/061004_C1-9_hih_corpgov_round01.pdf accessed on 04/05/2017.

Using an Eng Arguntative Essay Sample

Using an Eng Arguntative Essay SampleIf you're looking for an easy and efficient way to write a good argument, consider a custom essay sample that is written by an expert English teacher. Whether your purpose is to gain insight into how to build and structure an argument or to learn how to craft your own in a variety of writing styles, an argument guide like the Eng Arguntitative Essay Sample will give you step-by-step guidance.Writing essay samples are used to give you a basic guideline to follow when writing and refining your essay. These kinds of guides are specifically designed to be easy to use and offer helpful pointers on how to formulate compelling arguments. This helps you to avoid confusion when writing, making it easier to realize the powerful aspects of the sentence structure that is necessary to develop and build a good argument.A common question asked about using an essay example to start a writing project is whether or not it is plagiarism. There are no rules that proh ibit you from trying to use a guide as a writing tool. However, there are many guidelines that can be followed. Some of these rules include the following:Argumentation does not necessarily need to be written in formal academic terms. This is because most essay guides are intended to show a step-by-step method to crafting persuasive arguments, which means that most of the examples given in them should be easy to understand and relate to. There are also some guides that may require you to use certain technical vocabulary, which is not required by every English teacher in every school. In this case, it is best to use only words and terms that you are familiar with.When writing an essay, English is not the only language that is essential. Before writing an essay, you should do your research to understand the right point of view and tone of communication to use. There are many essay guides available online that are written for different purposes, including but not limited to essay writin g. Be sure to find a guide that you feel comfortable with so that you don't come across as trying to force an agenda on the reader.There are also many arguments for and against using such essays as part of your writing process. When using an essay example, you should always pay attention to the format of the document. You should check out a lot of different essay examples and make sure that it is consistent with the rest of your writing project. It should be formatted well so that you can put together a complete paper that shows the reader how to use the various points and angles of an argument. It is also important to keep the essay objective in mind, so that you do not end up with an overly long or boring argument.Many writers place importance on academic research and argumentative writing ability. Those who are looking to sharpen their writing skills will be interested in learning more about English essay examples. Whether you are doing a general research paper, an essay for an e ssay competition, or if you want to develop an argument for a book manuscript, you can use an example to get a better idea of how the format works and what type of grammar and style should be used.An argumentative essay is not necessary for every writer, but it is very useful for those who are interested in improving their writing skills. For those who wish to hone their abilities, an essay guide can help.

The Tennis Serve Essay Example For Students

The Tennis Serve Essay The tennis serve is the stroke that puts the ball in play and is often referred to as the most important stroke in the game of tennis. It has become a principle weapon of attack and is used to place the opponent on the defensive by forcing a return from the weak side or by moving the receiver out of position. A good strong serve can sometimes be the basis of winning a game of tennis. I have included eight picture sequences to illustrate the tennis serve. Represented in picture A is the stance of the serve. In this part of the serve, the person needs to take a position sideways to the net, about three or four feet to the right center mark behind the baseline. The left foot is two to three inches behind the line, the toes pointing toward the net post. The back foot is parallel to the baseline and spread conformably from the front. We will write a custom essay on The Tennis Serve specifically for you for only $16.38 $13.9/page Order now Pictures B and C represent the preparation phase. In these pictures, the execution of the ball toss is performed. The ball toss is the key to a well-executed serve: a good release consistently places the ball in the proper hitting position. A poor release can throw off timing and ultimately cause a bad serve. In pictures D-F the action phase is represented. In picture D of the action phase, the elbow reaches a position slightly higher than the shoulder, then the elbow bends and the racket head drops down behind the back into what is called the back scratching position. In picture E, the ball should be at its maximum height of the toss before striking it. In picture F, the last of the action phase, the movement of striking the ball is explosive in an upward and forward motion until contactPictures G and H represent the follow through. In the follow through the action is performed up and out, not down, in the direction of the intended target area. The follow through is a natural continuation of the stroke. A good follow through will help prepare for the next step in approaching the net for a return. Kinematics is defined as the study of motion. It is compiled of different bodily planes and different joint motions. In the beginning of the serve, during the stance (picture A), the feet are outwardly rotated. The hips and the trunk are extended. The left shoulder is slightly flexed along with the right shoulder and the shoulder girdles are slightly abducted. Both of the wrists are pronated with the elbows slightly flexed. During the preparation (pictures B and C) the feet are still in an outwardly rotated position. The hips slightly abduct with the trunk still in full extension. The shoulders are abducted, with slight elevation of the shoulder girdle. Both elbows are extended, but the right wrist stays in a pronated position and the left wrist is supinated. During the action (pictures D-F) the right foot inwardly rotates along with it performing planter flexion but the left foot stays in an outwardly rotated position. The hips are adducted but then they shift to abduction. The trunk starts in hyperextension then get fully extended and slightly rotate to the left. Both knees flex but the left knee extends while the right knee stays flexed. The left shoulder goes from flexion to extension while the right shoulder performs high diagonal adduction. The left elbow goes from extension to flexion and the right elbow goes from flexion to extension. The left hand goes from supination to pronation while the right hand stays in a pronated position. Finally, during the follow through (pictures G and H) the left foot inwardly rotates along with some planter flexion. The right foot inwardly rotates and goes back to a naturally flat position. Both hips are flexed along with the flexion of the trunk and its rotation. The left shoulder remains in an extended position but the right shoulder follows through with the high diagonal adduction, while both shoulder girdles perform abduction. The right elbow slightly flexes but the left elbow extends. The knees go from flexion to a greater degree of flexion. The kinematics of the tennis serve is a complicated thing, it consist of many laws and principles. One law is the law of inertia and the principles deal with motion, force and projectiles. These laws and principles can be applied to a skill, for example the tennis serve. The first principle deals with stability. This principle consist of smaller groups dealing with mass, friction, height of the center of gravity, position of the center of gravity, and base of support. The mass of the person in pictures A through H is of a certain weight. This mass or weight throughout the serve is considered to be constant. This observation is made because during the tennis serve the person performing the serve cannot gain or loss mass during the serve. Friction can be a major factor in a sport or game. The type of footwear available can help an althea to the point of better counter force when jumping or better traction for different surfaces. A tennis shoe does not need to have great counter force because there is not a lot of jumping but traction is important because of different surfaces like clay, grass, and concrete. Each surface performs differently for each athlete so there should be a traction on the shoe to benefit sprinting forward but also being able to move side to side. Height of center of gravity is one important factor in good equilibrium. In the stance position of the tennis serve (picture A), the height of gravity is in the middle around the navel. This remains constant through the prep phase (picture C), but when the action phase starts (pictures D F) the height of gravity moves up with the extension of the racket arm and trunk. Then in the follow through (picture G, H) height of gravity starts to go down because of the descending motion of the racket arm and trunk. Position of center of gravity is another important part in good equilibrium. In the stance position of the tennis serve (picture A) the position of gravity is about two inches above the belt. Then in the prep phase (picture C) it moves upward about four inches above the navel. Next, in the action phase (pictures D F) center of gravity moves three inches to the right of the navel and about four inches above the navel. In the follow through (picture G, H) the center of gravity is about four inches outside the body parallel to the belt line. Base of support is the area formed by the outer most region of contact between the body and a support surface. During the serve (pictures A D) the base of support is pretty much constant. It is just enough not to fall but good enough to push off of the surface. In picture E the base narrows a little because of the force of pushing off with the left foot. Pictures F and G, the base is wider then narrows and drops down and forward, this is because of momentum pulling the body forward into the follow through. At the end the base of support is narrowed to bring the feet under the body for better equilibrium because the center of gravity is outside the body, this is to keep the body from falling. The first law of kinematics is the law of interia. This law has principles that deal with motion. Translatory motion is defined as motion moving in a straight line. Rotary motion is defined as motion moving in a circle. Combining translatory and rotary motion in the tennis serve is shown by the rotary motion of the racket arm and the motion of the trunk in the follow through. Translatory motion is shown by the stepping forward of the trunk, legs, and partially of the racket arm. Continuity of motion is shown during the action phase (pictures D F) with the tossing of the tennis ball while bringing the racket into a striking position and also extended the trunk and legs. This is all performed at the same time with no pause. If there was pause in any of these motions there would not be enough momentum to create a very effective serve. .u67dfcb6dab35963dfce55fe9adfde210 , .u67dfcb6dab35963dfce55fe9adfde210 .postImageUrl , .u67dfcb6dab35963dfce55fe9adfde210 .centered-text-area { min-height: 80px; position: relative; } .u67dfcb6dab35963dfce55fe9adfde210 , .u67dfcb6dab35963dfce55fe9adfde210:hover , .u67dfcb6dab35963dfce55fe9adfde210:visited , .u67dfcb6dab35963dfce55fe9adfde210:active { border:0!important; } .u67dfcb6dab35963dfce55fe9adfde210 .clearfix:after { content: ""; display: table; clear: both; } .u67dfcb6dab35963dfce55fe9adfde210 { display: block; transition: background-color 250ms; webkit-transition: background-color 250ms; width: 100%; opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #95A5A6; } .u67dfcb6dab35963dfce55fe9adfde210:active , .u67dfcb6dab35963dfce55fe9adfde210:hover { opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #2C3E50; } .u67dfcb6dab35963dfce55fe9adfde210 .centered-text-area { width: 100%; position: relative ; } .u67dfcb6dab35963dfce55fe9adfde210 .ctaText { border-bottom: 0 solid #fff; color: #2980B9; font-size: 16px; font-weight: bold; margin: 0; padding: 0; text-decoration: underline; } .u67dfcb6dab35963dfce55fe9adfde210 .postTitle { color: #FFFFFF; font-size: 16px; font-weight: 600; margin: 0; padding: 0; width: 100%; } .u67dfcb6dab35963dfce55fe9adfde210 .ctaButton { background-color: #7F8C8D!important; color: #2980B9; border: none; border-radius: 3px; box-shadow: none; font-size: 14px; font-weight: bold; line-height: 26px; moz-border-radius: 3px; text-align: center; text-decoration: none; text-shadow: none; width: 80px; min-height: 80px; background: url(https://artscolumbia.org/wp-content/plugins/intelly-related-posts/assets/images/simple-arrow.png)no-repeat; position: absolute; right: 0; top: 0; } .u67dfcb6dab35963dfce55fe9adfde210:hover .ctaButton { background-color: #34495E!important; } .u67dfcb6dab35963dfce55fe9adfde210 .centered-text { display: table; height: 80px; padding-left : 18px; top: 0; } .u67dfcb6dab35963dfce55fe9adfde210 .u67dfcb6dab35963dfce55fe9adfde210-content { display: table-cell; margin: 0; padding: 0; padding-right: 108px; position: relative; vertical-align: middle; width: 100%; } .u67dfcb6dab35963dfce55fe9adfde210:after { content: ""; display: block; clear: both; } READ: The Matrix (1018 words) EssayMomentum is the product of a bodys mass and linear velocity. Momentum can be changed by changing direction. To produce an effect of momentum during the serve, since mass is constant, the velocity of the body must be increased. This is done by the extension of the racket arm along with the trunk and moving the center of gravity forward to produce a good momentum in striking the tennis ball, this intern with the racket striking the ball turns it into a force, this force is equal to the momentum of the body. During the action phase of the serve (pictures D F) transfer of momentum is achieved by extending the legs, trunk, and racket arm. This is d one because mass remains constant, so to increase speed the body must become longer to help contribute to the total body momentum. In the tennis serve acceleration is proportional to force because mass in the body of the server is constant. So if the server has a great amount of acceleration then there will be a great amount of force when striking the tennis ball with the racket. Maximum acceleration is achieved by moving the whole body in a forward motion with continuity and timing. There are really no extraneous movements because most movements like the extension of the legs, trunk, racket arm, and the moving forward of the body are all extended to create greater body momentum. Timing is very important and should be practiced because it is probably the hardest thing to get down to create maximum acceleration and effective motion. In the serve the bodys radius is lengthened so according to the principle the rotation is shortened during the follow through phase, this is because with a lengthened radius the body has more area to cover. This is sacrificed because greater momentum to where the ball must be hit is more important then rotational speed. This is illustrated in the action phase (pictures D F) with the extension of the legs, trunk and racket arm. This shows the lengthening of the bodys radius. During the action phase of the serve never unsupported as seen in the pictures D F. Both feet seem to be on the ground in constant support of the body, so this principle does not apply to this particular serve. Although some people might actually, force a split second, become airborne during the serve, then this principle would apply. There are three major surface variations in tennis all with different counter force. Clay is the first surface, although it is somewhat soft is does not contain good counter force because it has a bad coefficient of restitution, which means it does not bounce back to original shape very well. Clay is also somewhat slippery so players must slide to position to hit the ball. Grass is another form of surface variation, it is also somewhat soft and does not have a very good coefficient of restitution but it is better then clay. Grass also has a degree slipperiness and also requires the sliding into position. Finally, concrete is the last surface variation, it has no counter force because there is no give and no coefficient of restitution but concrete is not as slippery as the other two surfaces. During the action phase of the tennis serve (pictures D F), the direction of counter force is projected down and back which in turn propels the server up and forward. This is done in a perpendicular manner to the surface so there will be no slippage. When the racket strikes the ball there are counter forces. When the ball is in contact with the racket, the racket has momentum but there is one possibility in the make of the racket to help contribute to counter force. If a player has a stiff racket with loss strings the give of the racket is not as great as the strings but when both their coefficients of restitution are activated, they perform in created more force for the striking of the ball. The ball itself also has a coefficient of restitution to help propel itself off the racket. The player also must have a firm grip at impact to reduce of eliminate give at the grip. Temporarily stored counter force can be found in many parts of the tennis serve. For one, the ball itself has it own ability to spring back to original shape, this all depends on the make of the ball. Next is the racket and the strings, each have a coefficient of restitution which results in temporarily stored counter force. A stiff racket like tightly wound strings have high restitution unlike a flexible racket and loss strings. Finally the shoes an athlete wears can have stored counter force depending on make and material. In the tennis serve as observed in pictures D F, during the sticking motion both feet are in contact with the ground to provide maximum to the ball, even though the bodies extended and looks like it could go airborne. Total force is equal to the sum of the forces of each body segment contributing to the act, if the forces are applied in a single direction and in the proper sequence with correct timing. If the variables sequence, timing, and direction are not all applied correctly together the total force will be minimal. During the action phase, pictures D-F, in the tennis serve total force is achieved by the extension of the arms, legs and trunk along with the timing of the movement of the racket arm in striking the ball, and also the leaning forward of the body. Force applications should be constant and as even as possible. The force applications should be this way so that maximum force can be used to overcome the resistance of gravity and air or water, and minimum force can be us ed to overcome inertia. The relationship between constant force over a greater distance and resulting velocity is a positive one. When the distance over which a force is applied increases, so does the velocity. During the prep phase, pictures A-C, the extension of the racket arm is done to create the distance in which greater velocity will occur and this resulting in a greater striking force of the tennis ball. Resulting movement depends on the direction and magnitude of the acting forces. If two of these forces act in the same general direction, the direction of the resulting force is somewhere between the two, and the magnitude of the resulting force is more than either, but not as much as the total of the two contributing forces. During the action phase, pictures D-F, the force of the arm, body and racket hitting the ball forward along with gravity pulling it downward, the balls flight, although going forward is also going down. This path of the ball is the between result of the two forces acting upon it. The relationship of muscle length and resulting force is that, the longer the muscle is, the greater the increase in force of that muscle. During the prep phase, pictures A-C, the muscles in the body and the racket arm are tensed or put on stretch to increase the length of the muscle to produce greater force. The relationship of linear speed to lever length is positive. This means that when a lever gets longer the linear speed gets faster, thus increasing the striking force. During the action phase, pictures D-F, the extension of the levers of the body and racket arm increases the linear speed, resulting in greater striking force of the tennis ball. .u67db1a3465e532db8c5372f777d61e1e , .u67db1a3465e532db8c5372f777d61e1e .postImageUrl , .u67db1a3465e532db8c5372f777d61e1e .centered-text-area { min-height: 80px; position: relative; } .u67db1a3465e532db8c5372f777d61e1e , .u67db1a3465e532db8c5372f777d61e1e:hover , .u67db1a3465e532db8c5372f777d61e1e:visited , .u67db1a3465e532db8c5372f777d61e1e:active { border:0!important; } .u67db1a3465e532db8c5372f777d61e1e .clearfix:after { content: ""; display: table; clear: both; } .u67db1a3465e532db8c5372f777d61e1e { display: block; transition: background-color 250ms; webkit-transition: background-color 250ms; width: 100%; opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #95A5A6; } .u67db1a3465e532db8c5372f777d61e1e:active , .u67db1a3465e532db8c5372f777d61e1e:hover { opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #2C3E50; } .u67db1a3465e532db8c5372f777d61e1e .centered-text-area { width: 100%; position: relative ; } .u67db1a3465e532db8c5372f777d61e1e .ctaText { border-bottom: 0 solid #fff; color: #2980B9; font-size: 16px; font-weight: bold; margin: 0; padding: 0; text-decoration: underline; } .u67db1a3465e532db8c5372f777d61e1e .postTitle { color: #FFFFFF; font-size: 16px; font-weight: 600; margin: 0; padding: 0; width: 100%; } .u67db1a3465e532db8c5372f777d61e1e .ctaButton { background-color: #7F8C8D!important; color: #2980B9; border: none; border-radius: 3px; box-shadow: none; font-size: 14px; font-weight: bold; line-height: 26px; moz-border-radius: 3px; text-align: center; text-decoration: none; text-shadow: none; width: 80px; min-height: 80px; background: url(https://artscolumbia.org/wp-content/plugins/intelly-related-posts/assets/images/simple-arrow.png)no-repeat; position: absolute; right: 0; top: 0; } .u67db1a3465e532db8c5372f777d61e1e:hover .ctaButton { background-color: #34495E!important; } .u67db1a3465e532db8c5372f777d61e1e .centered-text { display: table; height: 80px; padding-left : 18px; top: 0; } .u67db1a3465e532db8c5372f777d61e1e .u67db1a3465e532db8c5372f777d61e1e-content { display: table-cell; margin: 0; padding: 0; padding-right: 108px; position: relative; vertical-align: middle; width: 100%; } .u67db1a3465e532db8c5372f777d61e1e:after { content: ""; display: block; clear: both; } READ: The New Liberal Arts EssayEmphasis on proper follow through eliminates the tendency to decelerate a throwing or striking action prior to its completion. Some other benefits of a proper follow through would be to maintain balance and to protect the joint by gradually slowing the body parts. In any case, once contact is broken with the object, follow through actions has no influence on the flight of the object. There are some external forces that can be used to benefit performance, like water resistance, friction, gravity, and air resistance. Having the correct shoe for the correct playing surface can be very helpful because it could help reduce friction resulting in greater speed. Using gravity and air resistance when striking the tennis ball could be used in the placing of the ball to make it harder for the opponent to hit it. The relationship of air/water resistance and velocity is that if the velocity at which a body travels is increased by two, the air/water resistance against it will increase by four. During the action phase, pictures D-F, when the tennis ball travels at a certain speed the air resistance is squared. This intern can affect the flight of the ball. Centrifugal force is only experienced during a rotational (angular) or curvilinear motion. It results from the tendency for an object to continue in a straight line instead of a curved path. It is counteracting by forces (usually muscular) which, if effective, equal or exceed the centrifugal force and tend to maintain the object to continue in its curved path. This counteracting force is centripetal force. In the case of a freely moving body, as velocity increases, centrifugal force increases. Additional weight also increases centrifugal force. The smaller the radius of a curved path, the greater the centrifugal force with the same velocity. During the action phase, pictures D-F, the half circle motion of the racket arm, when in the process of hitting the ball, wants to go in a straight line but the muscles keep it from doing that. Instead, it brings the racket around to strike the ball at the peak height of the ball toss. A force from a blow can be diminished by distributing the force over either a greater time (and distance) or area, or both. During the action phase, pictures D-F, the size of the racket head determines the distributing of the force of the tennis ball. The bigger the racket head the more the force of the ball is diminished. In catching an object, the objects momentum is dissipated by eccentric muscular contractions allowing the joints to move through controlled flexion; and while momentum is being reduced, body parts flex to grasp the object securely. This principle is not found in the tennis serve because there is no object being caught. If the application is directly through the projectiles center of gravity, only linear motion results from the force. As the projecting force is moved farther from the center of gravity, rotary motion of the object increases at the expense of linear motion. If the force is below the objects center of gravity, backspin results. If the force is above the objects center of gravity, topspin results. The striking of the ball above or below its center of gravity which can intern result in topspin or backspin which can change the direction of the ball when it hits the court and also in the air. The force of gravity on a object starts to diminish its vertical velocity as soon as contact is broken. The factors that determine how soon gravity will cause the object to descend are weight, amount of force driving it upward, and the effect of air resistance on the object. The relationship of speed and air resistance is that as speed increases air resistance plays a more significant role. Objects that are less dense and streamlined are influenced less by air resistance, and the less surface area an object presents, the less will be the effect of air resistance on the object. The tennis ball being somewhat small, round, hollow, and fuzzy, makes it less dense, more streamlined, and it presents less surface area. This all intern makes the tennis ball a pretty streamlined. The optimal angle for maximum distance when the beginning and end points are at the same level is 45 degrees. The effects of a less than optimal angle results in little distance. The effect of a greater then optimal angle can also result in little distance. When starting points are above or below ending points, reduce angle to get maximum distance. Since the greatest angle for projection is 45 degrees, the tennis serve is struck downward as close to 45 degrees as possible. The relationship of the angle of incidence to the angle of reflection is equal. This means that the angle at which the object approaches a surface is equal to the angle at which it leaves that surface. The factors that could change this would be irregular shapes of the two colliding surfaces, the force resulting from elasticity of the object, and the spin of the object both during and after contact. If all else is constant , the angle the tennis ball hits the ground is the angle it will project of the ground. Also in tennis spin will effect the angle. A highly elastic object will quickly spring back to its original shape after being compressed. The compression of the tennis ball is somewhat moderate but there is also what is called a high compression ball on the market. The elasticity is really high because the ball is made out of rubber, which has a good restitution. The greatest rebound results from a moderately compressed ball with high elasticity. For tennis, a stiff racket and loose strings will produce the greatest elasticity of the ball because the racket if loose does not have great restitution as well as the strings do. Also the ball is highly compressed and has a lot of elasticity to it, to help propel it fast. An object propelled without spin tends to waver because of air resistance against the objects irregular surface. A small amount of spin on an object produces a stabilizing effect which tends to hold it on its line of flight. Increased spin will tend to cause the object to curve in the same direction as the spin because of unequal air pressure cause by the spinning. During the serve or contact with the ball spin is added to the ball to throw the opponent off guard. The effect of the spin is to make the opponent change direction very quickly. To cause an object to spin in the desired direction, the striking implement should be drawn across the object in the direction of the desired spin. Topspin is caused by an implement striking forward-upward. Backspin is produced when the strike is made forward-downward. In the serve topspin is added to draw the ball out or make it jump up. Backspin is added to make the ball fall short, so to make the opponent run to the net. Topspin causes a lower angle of rebound, a longer bounce, and more roll. Backspin causes a higher angle of rebound, a shorter bounce, and less roll. In the serve these spins are used to throw the opponent off guard and to make them make a quick decision and mess up. The effects on a vertical surface are different than on a horizontal surface. Topspin causes a higher rebound , backspin causes a lower rebound, right spin causes a rebound to the left, and left spin causes a rebound to the right. Tennis serve does not happen on a vertical surface at all. The serve is the most important part of tennis, it starts the game and sets the tone for the match. Many of the professionals today have mastered most of theses principles, and these principles can be seen by just watching a match by a valid tennis player. BiomechanicsThe Tennis Serve.

contrast essay Popular Music Essays - Essay, Paragraph

Comparison/contrast essay Popular Music Essays - Essay, Paragraph The Poetics of Popular Music Proposal (5%) & Final Essay (25%) For your final comparison/contrast essay you have two choices: Rarely, if ever, does a songwriter only write one song about something; rather, over the course of their career, they return to the same themes or ideas over and over again. So, pick one lyricist(s) and analyze how they explore one theme/idea in multiple (at least 3) songs. Certain themes/ideas in lyrics are popular for many reasons; not the least of which is because they attract many songwriters to it. So, pick one theme/idea and explore how multiple (at least 3) lyricists address it. You can consider themes and lyricists either in or outside of the coursepack. How to approach this? The Proposal should not only clearly state which lyricist(s) and songs youre addressing but also contain some sort of sense how youre planning on doing so. There is no word count required but the more specific detail provided regarding what youll be considering and how youll be considering it (working thesis, some sense of how the body paragraphs will be constructed, etc.) the better. The Proposal is to be sent to me by MIO as a Word attachment by Thursday, November 27th at noon. No late proposals will be accepted. There will be no class on Friday, November 28th! Instead, on that day, every student will have to meet with me in my office (P150) for a brief (around 5-10 minutes) discussion to go over your proposal, what needs to be done, improved, clarified, etc. in order to enable you to go forward. I will be in my office from 8:30 to around 12:30 and people will be seen on a first come, first seen basis. Only when both of these steps have been done (MIO received and meeting held) will you be given your mark (on 5%). Failure to do both will result in a 0%. No final essay will be accepted without both of these steps being taken. The final essay itself should be at least 1000 words (remember though: theres nothing magical about hitting a word count saying something is everything), double-spaced in a clear 12 point font. It must include the lyrics of the songs youll be considering (not part of your word count) and be handed in on the possible due dates (information below) no MIOd versions will be accepted. Again, only the lyrics, in terms of form and content, should be considered. Biography, musical style, how the song is sung, etc., as always, are meaningless and should not be considered as adding anything whatsoever to analysis. You may use secondary sources if you wish but any words or ideas not your own must be properly cited in standard MLA format. Failure to do so is plagiarism and will result in a mark of 0 for this assignment and likely failure of the course. Your essay will be marked by the following criteria: Content (13%): fully develops argument/thesis; detailed and analytical; free of summary/obviousness; well-chosen quotes clearly and fully support analysis Organization/Formatting (6%): clearly organized paragraphs; clear topic and concluding sentences in each body paragraph; transitional words utilized; quotes fully and completely incorporated; MLA style (line #s cited after quotes, etc.); proper standard essay formatting used throughout (double-spaced, indented at beginnings of paragraphs, spacing, etc.) Expression (6%): Consistently clear word use; verb tense consistently in the present (the lyricist shows, the speaker feels); spelling; punctuation, sentence structure; mechanics (no use of I outside of conclusion or needlessly informal language); grammar Final Essay Due Dates: Tuesday, Dec 9th In Class (no marks lost for lateness) Wednesday, Dec 10th P150 (- 5%, or 1.25 out of 25) Thursday, Dec 11th P150 (-10%, or 2.5 out of 25) Friday, Dec 12th P150 (-15%, or 3.75 out of 25) No essays will be accepted after Friday, Dec 12th at noon. Questions? MIO me anytime or come by P150 during office hours.

Confusion and Loss of Direction in the 1960s Essay

Confusion and Loss of Direction in the 1960s - Essay Example Released in 1970, the album Let It Be includes popular songs such aslike Let It Be, The Long and Winding Road, Two of Us and Dig a Pony, among others (Beatles 1970). Despite the different topics and situations that the songs present, they commonly project common themes, particularly, confusion and loss of direction of the personas. Confusion and loss of direction are fairly common topics in the music of the 1960s andup to the 70s. Ritzen (2005) and Fendrich (1993) confirm this general atmosphere, which may be attributed to the wars of the time. In the songs of the Beatles, confusion occurs as a main theme, especially in the song Let It Be (Beatles 1970). The song begins with the lines, â€Å"When I find myself in times of trouble, Mother Mary comes to me. Speaking words of wisdom, let it be† ((Let It Be; lines 1-3). The persona expresses being in trouble and seeking divine intervention. The statement, â€Å"let it be† further shows the persona's inability to decide by him and get over with his troubles. Confusion and loss of direction in the songs of the Beatles is mostly associated with travelling, being on transit, or going around in circles. This theme is strongly reflected by the song, Two of Us (Beatles 1970). The song begins with the following lines: Two of us riding nowhere spending someone's Hhard earned pay (Two of Us; lines 1–3) In the lines above, the persona does not know where to go and implies having no goal in life. In the song, Dig a Pony, the persona also demonstrates having no place to go and not thinking of what islies ahead (Beatles 1970). These feelings are expressed in the lines, â€Å"Well you can penetrate any place you go/Yes you can penetrate any place you go† (Dig a Pony; lines 6-7).

Writing Assignment Research Paper Example | Topics and Well Written Essays - 500 words

Writing Assignment - Research Paper Example This is called bounded rationality. We all know that NASA from very long wants to send a man to Mars. But, since this would be the very first time a man would be going to Mars, we have only limited information available about that planet. So, this first visit to Mars might not lead to a definite success for NASA. According to Simon, to satisfice means to take a decision which is good-enough for the present situation. The term Satisficing is also called Muddling Through. The word Satisfice was coined by Herbert Simons. It refers to a sub-optimal choice made by the decision maker which he considers to be good enough. Satisificing, therefore, is a decision making process which leads to a near optimal solution and not the optimal one. Satisficing is not a form of rational actor behavior, since the rational behavior would lead to the most optimal alternative available as the decision. But, satisficing considers the sub-optimal decision. Satisificing is more closely akin to bounded rationality since both these approaches lead to a decision which is not the most optimal or rational one. Simon wished to replace the economic assumption of global rationality since he strongly believed that it is not possible for human beings to behave rationally because of their computing limitations, and also time and information accessing limitations. Simon believed that the way humans ‘actually’ make decisions is by following the approaches of bounded rationality and satisficing (Newell, 1972). I strongly agree with Simon on his approach to decision making. His approach does make sense because human decision making has a lot of challenges in terms of selecting the best alternative. I would like to enlighten this with the help of an important recent happening which is the law enforcement in recent London riots. The laws were enforced in a way such that the riots are deterred immediately. Even if the culprits could not be caught of immediately, it